Improved accuracy in IoT-Based water quality monitoring for aquaculture tanks using low-cost sensors: Asian seabass fish farming.

Traditional approaches to monitoring water quality in aquaculture tanks present numerous limitations, including the inability to provide real-time data, which can lead to improper feeding practices, reduced productivity, and potential environmental risks. To address these challenges, this study aimed to create an accurate water quality monitoring system for Asian seabass fish farming in aquaculture tanks. This was achieved by enhancing the accuracy of low-cost sensors using simple linear regression and validating the IoT system data with YSI Professional Pro. The system's development and validation were conducted over three months, employing professional devices for accuracy assessment. The accuracy of low-cost sensors was significantly improved through simple linear regression. The results demonstrated impressive accuracy levels ranging from 76% to 97%. The relative error values which range from 0.27% to 4% demonstrate a smaller range compared to the values obtained from the YSI probe during the validation process, signifying the enhanced accuracy and reliability of the IoT sensor by using simple linear regression. The system's enhanced accuracy facilitates convenient and reliable real-time water quality monitoring for aquafarmers. Real-time data visualization was achieved through a microcontroller, Thingspeak, Virtuino application, and ESP 8266 Wi-Fi module, providing comprehensive insights into water quality conditions. Overall, this adaptable tool holds promise for accurate water quality management in diverse aquatic farming practices, ultimately leading to improved yields and sustainability.

Review of the application of bimetallic catalysts coupled with internal hydrogen donor for catalytic hydrogenolysis of lignin to produce phenolic fine chemicals.

Lignocellulosic biomass contains lignin, an aromatic and oxygenated substance and a potential method for lignin utilization is achieved through catalytic conversion into useful phenolic and aromatic monomers. The application of monometallic catalysts for lignin hydrogenolysis reaction remains one of the major reasons for the underutilization of lignin to produce valuable chemicals. Monometallic catalysts have many limitations such as limited catalytic sites for interacting with different lignin linkages, poor catalytic activity, low lignin conversion, and low product selectivity. It is due to lack of synergy with other metallic catalysts that can enhance the catalytic activity, stability, selectivity, and overall catalytic performance. To overcome these limitations, works on the application of bimetallic catalysts that can offer higher activity, selectivity, and stability have been initiated. In this review, cutting-edge insights into the catalytic hydrogenolysis of lignin, focusing on the production of phenolic and aromatic monomers using bimetallic catalysts within an internal hydrogen donor solvent are discussed. The contribution of this work lies in a critical discussion of recent reported findings, in-depth analyses of reaction mechanisms, optimal conditions, and emerging trends in lignin catalytic hydrogenolysis. The specific effects of catalytic active components on the reaction outcomes are also explored. Additionally, this review extends beyond current knowledge, offering forward-looking suggestions for utilizing lignin as a raw material in the production of valuable products across various industrial processes. This work not only consolidates existing knowledge but also introduces novel perspectives, paving the way for future advancements in lignin utilization and catalytic processes.

Plant-based calcium silicate from rice husk ash: A green adsorbent for free fatty acid recovery from waste frying oil.

Driven by the urgent need for a solution to tackle the surge of rice husk (RH) and waste frying oil (WFO) waste accumulation at a global scale, this report highlights the use of calcium silicates (CS) extracted from acid-pre-treated rice husk ash (RHA) for free fatty acid (FFA) removal from WFO as conventional RHA shows limited FFA adsorption performance. A novel alkaline earth silicate extraction method from acid-pre-treated RHA was outlined. The structural and behavioural attributes of the synthesised CS were identified through BET, SEM-EDS, and XRD analyses and compared to those of RHA. Notable morphology and structural modification were determined, including reducing specific surface areas, mitigating from amorphous to crystalline structure with regular geometric forms, and detecting Si-O-Ca functional groups exclusive to CS adsorbents. A comparison study showed superior lauric acid (LA) adsorption performance by CS absorbents over acid-pre-treated RHA, with a significant increase from 0.0831 ± 0.0004 mmol LA/g to 2.5808 ± 0.0011 mmol LA/g after 60 min. Recognised as the best-performing CS adsorbent, CS-1.0 was used for further investigations on the effect of dosage, LA concentration, and temperature for efficient LA adsorption, with up to 100% LA removal and 5.6712 ± 0.0016 mmol LA/g adsorption capacity. The adsorption isotherm and kinetic studies showed LA adsorption onto CS-1.0 followed Freundlich isotherm with KF = 0.0598 mmol(1-1/n) L(1/n) g-1 & Qe,cal = 3.1696 mmol g-1 and intraparticle diffusion model with kid = 0.1250 mmol g-1 min0.5 & Ci = 0.9625 mmol g-1, indicating rapid initial adsorption and involvement of carboxylate end of LA and the calcium ions on the CS-1.0 in the rate-limiting step. The high equilibrium adsorption capacity and LA adsorption rate indicated that the proposed CS-1.0 adsorbent has excellent potential to recover FFA from WFO effectively.

Synthesis and antitumor activity of model cyclopentene-[g]annelated isoindigos.

A set of cyclopenten-[g]annelated isoindigos (5a-g) has been prepared and tested for their in vitro antiproliferative activities against MCF-7 and HL60 cells. Among, the N-1-methyl-5'-nitro derivative (5g) displayed the highest activity against HL60 cells (IC50 = 67 nM) and acted as the most potent Flt3 inhibitor. Compounds 5d-g exhibited moderate activity against MCF-7 (IC50 = 50-80 µM).

Assessing the impact of physical activity on bone density, cardiopulmonary function, and metabolic health in stroke survivors.

Stroke survivors often face motor impairments leading to decreased physical activity, which can, in turn, result in secondary health-related issues like cardiovascular and pulmonary impairment and osteoporosis. This research finds out the impact of physical activity on bone mineral density, cardiopulmonary health, and metabolic status in stroke survivors. The goal is to generate knowledge to inform rehabilitation strategies, emphasizing the significant role of regular exercise in enhancing the health of individuals recovering from stroke. This study was conducted using a cross-sectional study design, and involved 100 stroke survivors selected through stratified random sampling. Physical activity was measured using the validated Stroke-Specific Physical Activity Questionnaire. Health outcomes were assessed through various means: bone mineral density via the OSTEOKJ3000 ultrasonic bone densitometer; resting heart rate and blood pressure via an automated monitor; lipid profiles through the CardioChek PA analyzer; Hb1Ac levels via the A1CNow + System; and respiratory parameters through a spirometer. Statistical analysis revealed bone mineral density is positively correlated with physical activity (R = 0.53, P < .001). Additionally, an association was found between physical activity and improved cardiopulmonary function (resting heart rate r = -0.45, P < .001; forced expiratory volume in one second R = 0.30, P = .0023; forced vital capacity R = 0.28, P = .0041). Moreover, higher physical activity levels correlated with lower low-density lipoprotein cholesterol levels (r = -0.35, P = .0007), higher high-density lipoprotein cholesterol levels (R = 0.33, P = .0012), and better glycaemic control (HbA1c r = -0.40, P = .0002). This study highlights the significant benefits of physical activity for stroke survivors, showing positive impacts on bone density, cardiopulmonary function, and metabolic health. It underscores the need to include regular exercise in rehabilitation strategies to mitigate secondary health complications and enhance the overall health of stroke survivors. Future research should continue investigating the potential benefits of physical activity in this population.

Exploring the Impact of Surface Functionalization on the Reaction, Magnetophoretic, and Collective Transport Behavior of Nanoscale Zerovalent Iron.

This study provides a systematic analysis of the transport and magnetophoretic behavior of nanoscale zerovalent iron (nZVI) particles, both bare and surface functionalized by poly(ethylene glycol) (PEG) and carboxymethyl cellulose (CMC), after undergoing a chemical reaction. Here, a simple and well-investigated chemical reaction of methyl orange (MO) degradation by nZVI was used as a model reaction system, and the sand column transport and low-gradient magnetophoretic profiles of the nanoparticles were measured before and after the reaction. The results were compared over time and analyzed in the context of extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory to understand the particle interactions involved. The colloidal stability of both bare and functionalized nZVI particles was enhanced after the reaction due to the consumption of metallic Fe content, resulting in a significant drop in their magnetic properties. As a result, they exhibited improved mobility across the sand column and a slower magnetophoretic collection rate compared to the unreacted particles. Here, the colloidal filtration theory (CFT) was employed to analyze the transport behavior of nZVI particles across the packed sand column. It has been observed that the surface properties of the reacted functionalized particles changed, possibly due to the entrapment of degraded products within the polymer adlayer. Moreover, quartz crystal microbalance with dissipation (QCM-D) measurements were performed to reveal the viscoelastic contribution of the adlayer formed by both bare and functionalized nZVI particles after the reaction on influencing their transport behavior across the sand column. Finally, we proposed the implementation of a high-gradient magnetic trap (HGMT) to reduce the transport distance of the colloidally stable CMC-nZVI, both before and after the reaction. This study sheds light on the behavioral changes of iron nanoparticles after the reaction and highlights environmental concerns regarding the presence of reacted nanoparticles.

Navigating a Complex Presentation: Management of Hypernatremic Dehydration, Acute Kidney Injury, Hyperkalemia, and Metabolic Acidosis in a Patient With Down Syndrome: A Case Report.

Worldwide, gastroenteritis is a well-known cause of dehydration in pediatric patients and can be life-threatening due to subsequent electrolyte disturbance or dehydration itself. In this case, we present an infant with Down syndrome (karyotype: 21 trisomy) who presented to us with moderate hypernatremic dehydration associated with severe hyperkalemia, moderate metabolic acidosis (pH: 7.1, random blood glucose: 80-110 mg/dL), and elevated kidney function tests secondary to the gastroenteritis caused by Entamoeba histolytica infection. The patient is being followed up by the pediatrics genetics clinic for growth and development, with regular screening for thyroid and celiac diseases, and he has no major heart, gastrointestinal, or renal anomalies. This unique and complex presentation of electrolyte disturbance and dehydration associated with a susceptible condition of Down syndrome deserves special attention with precise management which can be challenging. We managed the patient as a case of hypernatremic dehydration with gradual correction of serum sodium and dehydration, while concurrently managing hyperkalemia by routine methods (beta agonist inhalers, insulin, dextrose 10%) with close laboratory and clinical monitoring at the pediatric intensive care unit. The pediatric nephrology team was also consulted while delineating the management plan. As the patient's condition eventually resolved with normal kidney function and electrolytes, metabolic acidosis also resolved, with good oral intake and urine output, stable vitals, and was discharged after 72 hours. In conclusion, this case showed that pediatric patients with susceptible conditions such as Down syndrome with gastroenteritis can present with a lethal combination of dehydration and/or electrolyte disturbance, making close monitoring and prompt management paramount in such cases.

Indications, Measurements, and Complications of Ten Essential Neonatal Procedures.

About 10% of newborns require some degree of assistance to begin their breathing, and 1% necessitates extensive resuscitation. Sick neonates are exposed to a number of invasive life-saving procedures as part of their management, either for investigation or for treatment. In order to support the neonates with the maximum possible benefits and reduce iatrogenic morbidity, health-care providers performing these procedures must be familiar with their indications, measurements, and potential complications. Hence, the aim of this review is to summarise ten of the main neonatal intensive care procedures with highlighting of their indications, measurements, and complications. They include the umbilical venous and arterial catheterizations and the intraosseous line which represent the principal postnatal emergency vascular accesses; the peripherally inserted central catheter for long-term venous access; the endotracheal tube and laryngeal mask airway for airway control and ventilation; chest tube for drainage of air and fluid from the thorax; and the nasogastric/orogastric tube for enteral feeding. Furthermore, lumber puncture and heel stick were included in this review as very important and frequently performed diagnostic procedures in the neonatal intensive care unit.

Ligand-specific regulation of transforming growth factor beta superfamily factors by leucine-rich repeats and immunoglobulin-like domains proteins.

Leucine-rich repeats and immunoglobulin-like domains (LRIG) are transmembrane proteins shown to promote bone morphogenetic protein (BMP) signaling in Caenorhabditis elegans, Drosophila melanogaster, and mammals. BMPs comprise a subfamily of the transforming growth factor beta (TGFß) superfamily, or TGFß family, of ligands. In mammals, LRIG1 and LRIG3 promote BMP4 signaling. BMP6 signaling, but not BMP9 signaling, is also regulated by LRIG proteins, although the specific contributions of LRIG1, LRIG2, and LRIG3 have not been investigated, nor is it known whether other mammalian TGFß family members are regulated by LRIG proteins. To address these questions, we took advantage of Lrig-null mouse embryonic fibroblasts (MEFs) with doxycycline-inducible LRIG1, LRIG2, and LRIG3 alleles, which were stimulated with ligands representing all the major TGFß family subgroups. By analyzing the signal mediators pSmad1/5 and pSmad3, as well as the induction of Id1 expression, we showed that LRIG1 promoted BMP2, BMP4, and BMP6 signaling and suppressed GDF7 signaling; LRIG2 promoted BMP2 and BMP4 signaling; and LRIG3 promoted BMP2, BMP4, BMP6, and GDF7 signaling. BMP9 and BMP10 signaling was not regulated by individual LRIG proteins, however, it was enhanced in Lrig-null cells. LRIG proteins did not regulate TGFß1-induced pSmad1/5 signaling, or GDF11- or TGFß1-induced pSmad3 signaling. Taken together, our results show that some, but not all, TGFß family ligands are regulated by LRIG proteins and that the three LRIG proteins display differential regulatory effects. LRIG proteins thereby provide regulatory means for the cell to further diversify the signaling outcomes generated by a limited number of TGFß family ligands and receptors.

Influence of Co3O4-based catalysts on N2O catalytic decomposition and NO conversion.

This study investigated the effect of different Co3O4-based catalysts on the catalytic decomposition of nitrous oxide (N2O) and on nitric oxide (NO) conversion. The experiments were carried out using various reaction temperatures, alkaline solutions, pH, mixing conditions, aging times, space velocities, impregnation loads, and compounds. The results showed that Co3O4 catalysts prepared by precipitation methods have the highest catalytic activity and N2O conversion, even at low reaction temperatures, while the commercial nano and powder forms of Co3O4 (CS) have the lowest performance. The catalysts become inactive at temperatures below 400 °C, and their activity is strongly influenced by the mixing temperature. Samples without stirring during the aging process have higher catalytic activity than those with stirring, even at low reaction temperatures (200-300 °C). The catalytic activity of Co3O4 PM1 decreases with low W/F values and low reaction temperatures. Additionally, the catalyst's performance tends to increase with the reduction process. The study suggests that cobalt-oxide-based catalysts are effective in N2O catalytic decomposition and NO conversion. The findings may be useful in the design and optimization of catalytic systems for N2O and NO control. The results obtained provide important insights into the development of highly efficient, low-cost, and sustainable catalysts for environmental protection.

Burden and Risk Factors of Postpartum Depression in Southwest Saudi Arabia.

OBJECTIVES: The burden of postpartum depression (PPD) is significant because it remains unrecognized, and it not only affects the mother adversely but also has a negative consequence on the family life and the development of the infant. The aim of the study was to measure the prevalence of PPD and identify the risk factors of PPD among mothers attending the well-baby clinic of six Primary Health Care centers in Abha city, Southwest Saudi Arabia. MATERIALS AND METHODS: A total of 228 Saudi women having a child aged between two weeks to one year were recruited in the study by using a consecutive sampling technique. The Arabic version of the Edinburgh Postnatal Depression Scale (EPDS) was used as a screening tool to measure the prevalence of PPD. The mothers were also inquired about their socio-demographic characteristics and risk factors. RESULTS: The prevalence rate of postpartum depression was 43.4%. Family conflict, and lack of support by spouse and family during pregnancy were found to be the strongest predictors of developing PPD. Women who had reported family conflict were at six times higher risk for developing PPD compared to those who did not have a family conflict (aOR = 6.5, 95% CI = 2.3-18.4). Women who reported a lack of spousal support during pregnancy encountered 2.3 fold increased risk for PPD (aOR = 2.3, 95% CI = 1.0-4.8) and women who had not received family support during pregnancy period were more than three times (aOR = 3.5, 95 % CI 1.6-7.7) likely to experience PPD. CONCLUSION: The risk of PPD among Saudi postnatal women was high. PPD screening should be an integral part of postnatal care. Awareness of women, spouses and families about potential risk factors can be a preventive strategy. The early identification of high-risk women during the antenatal and post-natal period could help to prevent this condition.

Experimental investigation and statistical validation of mathematical models for hot air drying traits of carrot.

The purpose of this investigation is to analyze the influence of sample shapes or geometry and dryer temperature on drying kinetics of carrot. Three different geometrical shapes including rectangular slab, circular discs and cubical samples, at temperatures of 70 °C, 80 °C and 90 °C, respectively, are dehydrated through hot air convection drying and regression analysis is executed to adjust the outcomes to 4 thin layer drying models. The models were validated by parameters- R2 (0.957-0.999), RMSE (0.0066-0.093), AIC (-209 to -54.6 for Henderson and Pabis model, -74.8 to -11.8 for Wang and Singh model, -91.47 to -22.7 for Newton model and -140 to -46.6 for Page model), BIC (-206 to -54 for Henderson and Pabis model, -72.4 to -10.76 for Wang and Singh model, -90.3 to -20.28 for Newton model and -138 to -43.92 for Page model) and residual errors (-0.03 to 0.03). The statistical analysis indicated that Henderson and Pabis model is best suited for the drying purpose. Fick's second law of diffusion is applied to compute values of effective moisture diffusivity, which was maximum for circular disc samples in all the cases and rose with an increase in dryer temperature. It varied in the range of 3.02 × 10-8 m2/s to 1.86 × 10-6 m2/s whereas the values of activation energies varied from 68.512 kj/mol to 74.256 kj/mol. The results obtained from this study reveals the experimentally determined drying properties of carrot in order to infer that circular disc shapes possess the ability to optimize the drying process in industries.

Detection and discrimination of sedative-hypnotics in spiked beverage dry residues using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy combined with chemometrics.

Drugs-facilitated crimes (DFCs) involve the incapacitation of victims under the influence of drugs. Conventionally, a drug administration act is often determined through the examination of biological samples; however, dry residues from any surface, such as drinking glass if related to a DFC could be a potential source of evidence. This study was aimed to establish an attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy coupled with chemometrics for the determination of spiked sedative-hypnotics from dry residues of a drug-spiked beverage. In this study, four sedative-hypnotics, namely diazepam, ketamine, nimetazepam, and xylazine were examined using ATR-FTIR spectroscopy. Subsequently, the ATR-FTIR profiles were compared and decomposed by principal component analysis (PCA) followed by linear discriminant analysis (LDA) for their detection and discrimination. Visual comparison of ATR-FTIR profiles revealed distinct spectra among the tested drugs. An initial unsupervised exploratory PCA model indicated the separation of four main sedative-hypnotics clusters, and the proposed PCA score-LDA model had allowed for a 100% accurate classification. Discrimination of sedative-hypnotics from a dry beverage previously spiked with these drugs was also possible upon an additional extraction procedure. In conclusion, ATR-FTIR coupled with PCA score-LDA model was useful in detecting and discriminating sedative-hypnotics, including those that had been previously spiked into a beverage.

Tunable band structure of synthesized carbon dots modified graphitic carbon nitride/bismuth oxychlorobromide heterojunction for photocatalytic degradation of tetracycline in water.

In this study, graphitic carbon nitride (CN) decorated with carbon quantum dot (CQD) and bismuth oxychlorobromide (BiOClxBr1-x) was fabricated by calcination and hydrothermal methods. The morphology characterization of the synthesized photocatalyst revealed that CQD and BiOClxBr1-x solid solution were deposited on the CN surface. CQD served as the electron reservoir, which could reduce the recombination of electron-hole pairs, thus improving the overall photocatalytic performance. The synergistic effect of 1 wt% CQDs and BiOCl0.75Br0.25 markedly improved the interfacial charge transfer efficiency and light-harvesting capacity of the composite. The degradation rate of tetracycline (TC) over CN/CQD/BiOCl0.75Br0.25 was 83.4 % after 30 min and favorable stability with near-initial capacity under visible light irradiation. Meanwhile, the reaction mechanism of the photocatalytic performance was demonstrated by the analysis of the surface adsorption sites, efficient utilization of visible light, and charge carrier transfer. The degradation by-products and potential degradation pathways were also analyzed using liquid chromatography-mass spectrometry. Finally, the toxicity estimation software tool (T.E.S.T) analysis indicated that the toxicity of most intermediates was lower than TC. This work provideed a strategy for fabricating visible light (VL) photocatalyst with excellent photocatalytic activity, furnishing a new insight for interface charge transfer.

Thiophene ring-opening reactions VI. Attempted cyclization towards [fused]-tricyclic system involving a thiolate anion and suitably located electrophilic carbon.

Model α-chloro-ß-nitrothieno[2,3-c]pyridazines incorporating N1-(aryl) entity appended with ortho-methoxycarbonyl or trifluoromethyl group were prepared via intramolecular cyclization of their respective N-arylhydrazone precursors. Interaction of these substrates with N'-(p-fluorophenyl)benzothiohydrazide, in the presence of NEt3, furnished the respective 1,3,4-thiadiazoline-pyridazine thiolate hybrids that were S-methylated to produce the corresponding "sulfanyl" derivatives. Their structures were deduced from spectral data, and confirmed by single-crystal X-ray diffraction.

Nanostructured material-based optical and electrochemical detection of amoxicillin antibiotic.

The penicillin derivative amoxicillin (AMX) plays an important role in treating various types of infections caused by bacteria. However, excessive use of AMX may have negative health effects. Therefore, it is of utmost importance to detect and quantify the AMX in pharmaceutical drugs, biological fluids, and environmental samples with high sensitivity. Therefore, this review article provides valuable and up-to-date information on nanostructured material-based optical and electrochemical sensors to detect AMX in various biological and chemical samples. The role of using different nanostructured materials on the performance of important optical sensors such as colorimetric sensors, fluorescence sensors, surface-enhanced Raman scattering sensors, chemiluminescence/electroluminescence sensors, optical immunosensors, optical fibre-based sensors, and several important electrochemical sensors based on different electrode types have been discussed. Moreover, nanocomposites, polymer, and MXenes-based electrochemical sensors have also been discussed, in which such materials are being used to further enhance the sensitivity of these sensors. Furthermore, nanocomposite-based photo-electrochemical sensors and the market availability of biosensors including AMX have also been discussed briefly. Finally, the conclusion, challenges, and future perspectives of the above-mentioned sensing techniques for AMX detection are presented.

Non-rebreather mask and low-flow nasal cannula vs high-flow nasal cannula in severe COVID-19 pneumonia in the emergency department.

BACKGROUND: To assess the effectiveness of non-rebreather mask combined with low-flow nasal cannula (NRB + NC) compared to high-flow nasal cannula (HFNC) in improving oxygenation in patients with COVID-19-related hypoxemic respiratory failure (HRF). METHODS: This retrospective study was conducted in emergency departments of two tertiary hospitals from June 1 to August 31, 2021. Consecutive patients aged >18 years admitted for COVID-19-related HRF (World Health Organization criteria: confirmed COVID-19 pneumonia with respiratory rate > 30 breaths/min, severe respiratory distress, or peripheral oxygen saturation < 90% on room air) requiring NRB + NC or HFNC were screened for enrollment. Primary outcome was improvement of partial pressure arterial oxygen (PaO2) at two hours. Secondary outcomes were intubation rate, ventilator-free days, hospital length of stay, and 28-day mortality. Data were analyzed using linear regression with inverse probability of treatment weighting (IPTW) based on propensity score. RESULTS: Among the 110 patients recruited, 52 (47.3%) were treated with NRB + NC, and 58 (52.7%) with HFNC. There were significant improvements in patients' PaO2, PaO2/FIO2 ratio, and respiratory rate two hours after the initiation of NRB + NC and HFNC. Comparing the two groups, after IPTW adjustment, there were no statistically significant differences in PaO2 improvement (adjusted mean ratio [MR] 2.81; 95% CI -5.82 to 11.43; p = .524), intubation rate (adjusted OR 1.76; 95% CI 0.44 to 6.92; p = .423), ventilator-free days (adjusted MR 0.00; 95% CI -8.84 to 8.85; p = .999), hospital length of stay (adjusted MR 3.04; 95% CI -2.62 to 8.69; p = .293), and 28-day mortality (adjusted OR 0.68; 95% CI 0.15 to 2.98; p = .608). CONCLUSION: HFNC may be beneficial in COVID-19 HRF. NRB + NC is a viable alternative, especially in resource-limited settings, given similar improvement in oxygenation at two hours, and no significant differences in long-term outcomes. The effectiveness of NRB + NC needs to be investigated by a powered randomized controlled trial.

The Discovery of Putative Small Molecules via Ligand-based Pharmacophore Modelling Targeting Human Tau Protein for an Effective Treatment of Parkinson’s Disease

@#Introduction: The human tau protein is a key protein involved in various neurodegenerative disease (NDs) including Parkinson’s disease (PD). The protein has high tendency to aggregate into oligomers, subsequently generating insoluble mass in the brain. Symptoms of PD include tremor, bradykinesia, rigidity, and postural instability. Currently drugs for PD treatment are only symptom-targeted while effective therapeutic treatment remains a challenge. The objective of this study is to identify novel promising anti-PD drugs using computational techniques. Method: ligand-based (LB) receptor modelling was conducted using LigandScout, validated and subjected to Glide XP docking, virtual screening, ADMET, and molecular dynamics predictions. Results: The adopted LB modelling generated pharmacophoric features of 5 hydrogen bond donors, 1 aromatic rings, and 7 hydrogen bond acceptors. The validation result indicated GH score of 0.73 and EF of 36.30 as validation protocols, probing it to be an ideal model. Using 3D query of the modelling a total of 192 compounds were retrieved from interbioscreen database containing 70,436 natural compounds. Interestingly, ligands 1, 2, 3, 4 and 5 orderly indicated higher binding affinities to the receptor with Glide XP docking of -7.451, -7.368, -7.101, -6.878, and -6.789 compared to a clinical drug Anle138b with -4.552 kcal/mol respectively. Furthermore, molecular dynamics and pkCSM pharmacokinetics demonstrated ligands 1, 2, & 4 having better stability and low toxicity profiles compared to the reference. Conclusion: In summary, the study pave way for discovery of small molecules that could be recommended as adjuvant /single candidate as ant-PD candidates upon further translational study.

Structure, functions, performance and gaps of event-based surveillance (EBS) in Sudan, 2021: a cross-sectional review.

BACKGROUND: Event-based surveillance (EBS) is an essential component of Early Warning Alert and Response (EWAR) as per the International Health Regulations (IHR), 2005. EBS was established in Sudan in 2016 as a complementary system for Indicator-based surveillance (IBS). This review will provide an overview of the current EBS structure, functions and performance in Sudan and identify the gaps and ways forward.  METHODS: The review followed the WHO/EMRO guidelines and tools. Structured discussions, observation and review of records and guidelines were done at national and state levels. Community volunteers were interviewed through phone calls. Directors of Health Emergency and Epidemic Control, surveillance officers and focal persons for EBS at the state level were also interviewed. SPSS software was used to perform descriptive statistical analysis for quantitative data, while qualitative data was analysed manually using thematic analysis, paying particular attention to the health system level allowing for an exploration of how and why experiences differ across levels. Written and verbal consents were obtained from all participants as appropriate. RESULTS: Sudan has a functioning EBS; however, there is an underestimation of its contribution and importance at the national and states levels. The link between the national level and states is ad hoc or is driven by the need for reports. While community event-based surveillance (CEBS) is functioning, EBS from health facilities and from non-health sectors is not currently active. The integration of EBS into overall surveillance was not addressed, and the pathway from detection to action is not clear. The use of electronic databases and platforms is generally limited. Factors that would improve performance include training, presence of a trained focal person at state level, and regular follow-up from the national level. Factors such as staff turnover, income in relation to expenses and not having a high academic qualification (Diploma or MSc) were noticed as inhibiting factors. CONCLUSION: The review recommended revisiting the surveillance structure at national and state levels to put EBS as an essential component and to update guidelines and standard operation procedures SOPs to foster the integration between EBS components and the overall surveillance system. The need for strengthening the link with states, capacity building and re-addressing the training modalities was highlighted.

Recent Progress on Tailoring the Biomass-Derived Cellulose Hybrid Composite Photocatalysts.

Biomass-derived cellulose hybrid composite materials are promising for application in the field of photocatalysis due to their excellent properties. The excellent properties between biomass-derived cellulose and photocatalyst materials was induced by biocompatibility and high hydrophilicity of the cellulose components. Biomass-derived cellulose exhibited huge amount of electron-rich hydroxyl group which could promote superior interaction with the photocatalyst. Hence, the original sources and types of cellulose, synthesizing methods, and fabrication cellulose composites together with applications are reviewed in this paper. Different types of biomasses such as biochar, activated carbon (AC), cellulose, chitosan, and chitin were discussed. Cellulose is categorized as plant cellulose, bacterial cellulose, algae cellulose, and tunicate cellulose. The extraction and purification steps of cellulose were explained in detail. Next, the common photocatalyst nanomaterials including titanium dioxide (TiO2), zinc oxide (ZnO), graphitic carbon nitride (g-C3N4), and graphene, were introduced based on their distinct structures, advantages, and limitations in water treatment applications. The synthesizing method of TiO2-based photocatalyst includes hydrothermal synthesis, sol-gel synthesis, and chemical vapor deposition synthesis. Different synthesizing methods contribute toward different TiO2 forms in terms of structural phases and surface morphology. The fabrication and performance of cellulose composite catalysts give readers a better understanding of the incorporation of cellulose in the development of sustainable and robust photocatalysts. The modifications including metal doping, non-metal doping, and metal-organic frameworks (MOFs) showed improvements on the degradation performance of cellulose composite catalysts. The information and evidence on the fabrication techniques of biomass-derived cellulose hybrid photocatalyst and its recent application in the field of water treatment were reviewed thoroughly in this review paper.